- Nemours Children's Hospital - 13535 Nemours Parkway Orlando, FL 32827 - LEED BD+C: New Construction v2 - LEED 2.2 - LEED GOLD 2013
- Verizon Lake Mary - 899 Heathrow Park Lane Lake Mary, FL 32746 - LEED ID+C: Commercial Interiors v3 - LEED 2009 - v3 - LEED 2009
- Nicolson Center For Surgical Advancement - 404 Celebration Pl, Celebration, FL 34747 United States - LEED Design Certification
The intent of Construction IAQ Monitoring and LEED EQc3.2 is to:
- Minimize exposure of construction workers to air pollutants;
- Prevent air pollutants from collecting in building systems and on building materials; and
- Prevent air pollutants caused by construction from migrating into occupied spaces.
Air pollutants are defined as:
- Volatile organic compounds;
- Combustion emissions;
- Airborne bacteria and micro-organisms; and
- Airborne inorganic compounds, such as ozone (from electrical motors), metal fumes (from smoldering and welding), and ammonia and chlorine (from cleaning products).
Requirements of LEED EQc3.2
Develop and implement an Indoor Air Quality (IAQ) Management Plan for the pre-occupancy phase as follows:
Conduct baseline IAQ testing, after construction ends and prior to occupancy, using testing protocols consistent with the United States Environmental Protection Agency Compendium of Methods for the Determination of Air Pollutants in Indoor Air and as additionally detailed in the Reference Guide.Demonstrate that the contaminant maximum concentrations listed below are not exceeded.
For each sampling point where the maximum concentration limits are exceeded conduct additional flushout with outside air and retest the specific parameter(s) exceeded to indicate the requirements are achieved. Repeat procedure until all requirements have been met. When retesting non-complying building areas, take samples from the same locations as in the first test.
The air sample testing shall be conducted as follows:
- All measurements shall be conducted prior to occupancy, but during normal occupied hours, and with the building ventilation system starting at the normal daily start time and operated at the minimum outside air flow rate for the occupied mode throughout the duration of the air testing.
- The building shall have all interior finishes installed, including but not limited to millwork, doors, paint, carpet and acoustic tiles. Non-fixed furnishings such as workstations and partitions are encouraged, but not required, to be in place for the testing.
- The number of sampling locations will vary depending upon the size of the building and number of ventilation systems. For each portion of the building served by a separate ventilation system, the number of sampling points shall not be less than one per 25,000 sq.ft., or for each contiguous floor area, whichever is larger, and include areas with the least ventilation and greatest presumed source strength.
- Air samples shall be collected between 3 feet and 6 feet from the floor to represent the breathing zone of occupants, and over a minimum 4-hour period.
Comprehensive Energy Services, Inc. was founded in 1992 by Todd and Shelly Morgan.
- Winner of the Second Place Award (Large Business Category) in Bright House Networks’ 2015 Regional Business Awards
- The company prominently ranks as the 4th largest Florida-based mechanical and plumbing contractor according to ENR’s 2014 Top 600 Specialty Contractors survey.
- Led by Todd Morgan, President, a 2014 CEO of the Year honoree by Orlando Business Journal, CES is a recognized leader recently named among Orlando Business Journal’s 2015 Golden 100 Top Privately-Held Companies.
Award-winning Comprehensive Energy Services, Inc. is a full-service Design-Build-Maintain Mechanical and Plumbing Contractor, and also notably ranks as a 2015 Best Place to Work by Orlando Business Journal.
The company self-performs a full range of advanced HVACR commercial and industrial services including:
- Mechanical Engineering Design and Construction,
- Building Automation & Controls,
- Indoor Air Quality (IAQ),
- Preventive Maintenance and Systems Repairs
CES provides services throughout the State of Florida. Comprehensive Energy Services, Inc.’s headquarters is located at 777 Bennett Drive in Longwood, Florida. In addition, the company operates a full-service office in Tampa.